How to clean the teapot from the stainless steel outside?
Favorite stainless steel kettle eventually gets dirty both from the outside and from the inside.
There are a lot of household chemicals on store shelves, but it is toxic, expensive, and sometimes ineffective. It is more rational to use simple folk remedies that, without much hassle, will help solve the problem of cleaning the kettle.
How to wash a kettle from a stainless steel outside?
This is a tool that is ideal for all occasions when it comes to cleaning dishes. Without exaggeration, this substance can be called universal.
Soda goes well with stainless steel, it can clean a metal kettle from:
- rust stains;
- body fat;
The teapot is wiped from the outside, put on the table. Soda is applied to a wet rag or sponge, and the surface is wiped. After completion, the kettle can be washed with running water. Then it is recommended to heat the kettle, in this case the plaque that forms on the outside from the outside can easily be cleaned. It is recommended that safety precautions be maintained during operation.dealing with hot utensils.
The disadvantage of soda lies in the advantages themselves, its small particles can leave scratches, they are not only able to clean the surface, but also damage it.
Water of room temperature is poured into the pan, soda is dissolved in it at the rate of 1 tablespoon per 1 liter of water. Then a stainless steel kettle is lowered into the pan, the pan is placed on the stove. Boil for no more than half an hour, then the liquid cools. Using a damp cloth, all plaque on the surface is wiped. To better clean the kettle, you can add a couple drops of detergent.
Soda is used in combination with vinegar. 4 tablespoons of soda and 4 tablespoons of vinegar are poured into a large pan, the contents are well mixed. Then a kettle is placed in this pan. The pan is placed on the stove. It is recommended to boil no more than ten minutes.
The liquid drains after it cools. The kettle is cleaned of plaque and grease, washed with tap water. Then you should wipe the surface with a towel.
It is important to observe the required concentration of the solution: the larger the pan, the more soda and vinegar will be required.
A small amount is squeezed from a tube of toothpaste onto a dry rag, and a stainless steel kettle is wiped from the outside. Then the surface is washed with warm water. Do not use whitening paste because of the content of particles in it, which can damage the dishes.
There are special cleaning compounds that effectively clean any dishes, for example: "Shumanit". There are other means, in the market there is a fair amount of them, for example, Cif, Cillit.
Each package contains a memo with recommendations for use: it is recommended that you carefully familiarize yourself with the information. When using cleaning products, be sure to wear gloves.
It should be remembered that all household cleaning products contain toxins that should not fall on the inner surface of dishes.
If you apply such a substance as “Schumanite” for cleaning, then must use a respirator. This substance can eliminate any plaque, but it is unsafe for health and also has an unpleasant odor.
How to wash the inside of an electric kettle?
Electric kettles often get plaque inside, so they need to be cleaned periodically. An effective remedy is citric acid. Calculating the concentration of this substance is not difficult. A bag of citric acid is packaged in 25 g, an ordinary teapot has a volume of not more than three liters. One bag is enough to clean the kettle from scale.
This problem arises regularly, the presence of plaque changes the taste of drinks, so regular maintenance work is recommended.
Citric acid is added to the teapot (one sachet), the vessel is "soaked" for one hour.
In this case, you should not use any devices in the form of brushes or something like that. The plaque will lag on its own, the most important thing is to make the necessary concentration of the solution so that it "works" efficiently.
Also good for home use is vinegar. It is ideal to clean the dirt outside the kettle and remove sediment inside the vessel. It is important to observe the time frame and the appropriate concentration.
A solution of nine percent vinegar is made in a ratio of 3: 1. Then it is boiled in a teapot, after which the liquid remains in the vessel for some time. Then the solution is drained, if the remains of scale still remain inside the kettle, then the operation is repeated again.
Inevitably, after the completion of the procedures, there will be a smell of vinegar, which is ingrained in the metal. It is not difficult to get rid of it: water from the tap is poured into the kettle and boiled over low heat. Usually, after repeating the second - third cycle, the smell of vinegar disappears.
There are also folk methods that effectively help get rid of plaque and dirt. Potato peel is boiling inside the kettle.
Cucumber pickle is also one of the popular ways to get rid of scale.
You can also pour Coca-Cola or Sprite, the chemicals in these drinks eliminate the scale layer.
From the outside, the kettle is easily cleaned with dishwashing liquid, this can be done even if the pollution is significant enough.
It is convenient to use special melamine sponges, their structure corresponds to an eraser. It is recommended to do everything carefully, moisture should be avoided on electrical contacts.
After completing all operation, the surfaces are wiped with a dry cloth.
In the market you can find effective remedies:
Such drugs are effective and easy to use. A portion of such a substance is added to the kettle, water is added, the contents are boiled for some time. However, it should be borne in mind that some drugs may be unsafe for health, so you should always carefully read the instructions. When working, it is also recommended to observe safety measures:
- wear gloves;
- a mask;
You can also clean the vessel with fruit acids. Pieces are placed in the kettle:
- an orange;
- unripe apples
Water is poured and boiled for some time. Fruit acids can work effectively with only a small layer of scale. Colored precipitate does not occur.
Often a soot forms on the kettle, it can be eliminated by the following method:
Water is poured into a large pot, soda is added and laundry soap is crumbled. Then a kettle is placed and the contents are boiled. After this, some time is needed when the liquid cools down. The kettle is removed and rubbed thoroughly with a dry cloth.
For how to easily clean the kettle inside and out, see the next video.